In the use of the oil press machines, you may encounter the phenomenon of oil back to the hopper.
Our VIC Machinery have summarized some causes and solutions, hoping to help you.
|
Causes |
Solutions |
|
Too thin cake |
enlarge the cake discharging gap, increase the cake discharging thickness, add the cake into the pressing chamber, and flush out the oil |
|
The oil materials contain too much oil and cannot be pressed in time |
Replace the parts, and select the pressing strips and rings for high oil content. |
|
Oil slot blocked |
Dredge the oil slot or remove and clean the oil slot |
|
the pressing strips and rings too tight |
Loosen the gland nut |
